TG1000B Roller Converyor Shot Blasting Machine For Angel Steel
1. Function & Application
Angel steel channel steel surface rust removing, welding slag
removing, descaling and stress
Cleaning degree Sa2.5.
Improving anti-fatigue performance and extending steel life
Improving the steel surface craft performance
Improving corrosion resistance to corrosion of machine and
Applied in the field of construction for machinery, chemical
vessel, transportation vehicle, ship, bridge, architectural profile
2. Main Components
Material sending roller conveyor
- Impeller head
Shots sending device
Hoister and separator
- Helix conveyor
Shots circulation system
- Blowing device
Electrical control system
3. Working principle
shot on the work-pieces in the cleaning chamber, removing the oxide
scale, rust and dirt
The shots, shotting rust and dust blowed by the blowing device, and
fall into the
hoister by the helix conveyor, and be sent to the separator by the
The separated clean shots go into the hopper and kept for
The dust sucked by blower to dust collector, filtering clean air
out and dust to the dust
collecting box which can be cleaned regularly.
4. Main Parameters
|Description||TG1000B Roller Converyor Shot Blasting Machine For Angel Steel
|Effective cleaning width||1000 MM|
|Dimension of inlet opening||1000 MM x 500 MM|
|Length of steel plate||1200 MM - 12000MM|
|Roller speed||1 - 5 M/MIN|
|Thickness of steel plate||5 MM - 60MM|
|Impeller head quantity||4 pieces|
|Shots flow rate||4 x 250 KGS/MIN|
|Impeller Head Power||4 x 11 KW|
|Dust Collector Power||15 KW|
|Hoist Power||5.5 KW|
|Total Power||86 KW|
|Electrical Controlling||PLC (Delta) & HMI|
5. Features of This Machine
Steplessly speed control for the roller converyor sending
workpieces into the blasting room
and out from the blasting room.
There is OPTO switch to test if there are workpieces. Shots will be
sent out only if there have
Rolling sweeping and blowing two kinds of cleaning up method make
sure there is no shots or
dust adhering on the workpiecs.
Accumulated shots sending time can be remembered which gives user
idea on when to
replace impeller wheel.
6.Advantaes of Our Shot Blasting Machine
Core components all use international brands
3-5 times of lifespan than nomal shot blasting machine.
Use Taiwan high wear-resistance impeller head, wear-resistant parts
can be used for 1500-
Main shoting room use high wear & blasting resistant steel
guard plate, high chromium
molybdenum alloy with 26.5-28% chromium. Lifespan 2-3 years.
- Vice shoting room use high Mn alloy steel guard plate, lifespan 10
Belt use recently developed Taiwan high wear-resistance rubber belt
with reinforcing steel
wire layer, no joint. Lifespan 2 years.
Every import transmission parts have proximity switches to avoid
further work when there is
Pulse bag dust collector collecting bag and electro-magnetic pulse
valve from Taiwan.
Winnowing splitter inside special design give 99% splitting rate.
Pneumatic controller controls
shots uniform flow, avoiding too much shots destroy motor or too
less shots cant work well.
- Conveyor and helix power adopt Taiwan Chengbang reducer. Conveyor
lifespan 2 years,
helix lifespan 7200 hours.
- PLC electrical control system.
Economical shots consumption. With 3 classes full flow curtain
hammer style shots
reclaim system. The shots will be cleaned and recycled to use,
reducing disposal and minimizing